Calmag Calfresh Complete Water Filter Kit

CalFresh is a filter system that is designed to supply quality drinking water and comes with its own separate drinking water touch tap. Water from the mains supply is connected to the inlet port of the unit and directed down through the filter cartridge. This reduces unwanted contaminants. Filtered water then flows up through the centre of the cartridge and through the outlet where it is delivered through the separate drinking water touch tap.

CalFresh comes with two choices of cartridge. The first is an activated carbon and resin filter, the Fresh CR. This will reduce bad taste, chlorine, odour, organic materials, limescale, scum and heavy metals. The Fresh CR is often recommended to protect kettles from hard limescale build up. The second is an activated carbon block filter, the Fresh C. This will reduce contaminants such as sediment, dirt, discolouration, bacteria and cysts. However it will not remove limescale and scum.

CalFresh comes with a lifetime guarantee against manufacturing defects. This does not cover the filter cartridge which needs to be replaced at least twice annually depending on your water quality.

Housing height: 300mm

Housing diameter: 75mm

Tap height: 200mm

Tap reach: 75mm

Filter cartridge replacement: Fresh C (carbon block) or Fresh CR (carbon/resin) both 10"x2.5"Ø

Colour/material: Standard is white manifold head with white bowl. Chrome tap. Colours may change.

Maximum working pressure: 5 Bar (75psi)

Minimum working pressure: 1 Bar

Tested to: 12 Bar (168psi)

Maximum temperature: 30°C
Maximum flow rate: 10 L/Min
Inlet & outlet: Standard is 3/4" BSP (female thread)